Jaw Crusher
0086-15136236223
[email protected]
The widely used primary crusher for big size stone
Multiple models for selection, can be customized according to customer requirementsJaw crushers are often used for primary crushing in mine material crushing. Jaw crusher is an equipment developed for aggregate crushing of highways, railways, airport runways and other engineering constructions. The jaw crusher produced by HAMAC adopts new crushing technology and manufacturing level, and is an ideal product for crushing hard and highly abrasive materials. Compared with the traditional jaw crusher, the HAMAC jaw crusher shows its superiority in terms of service life, maintenance rate and failure rate.
- From 10-1000 tons per hour
- High quality manganese steel
- V type crushing chamber
Online Inquiry
Leave a message
Introduction
Jaw crusher, also known as "tiger mouth". It is widely used in the crushing of various ores and stones in mining and smelting, building materials, highways, railways, water conservancy and chemical industries. The higher compressive strength of the crushed material is 320Mpa. Jaw crushers are mainly used as primary and secondary crushers in mining, building materials, infrastructure and other sectors. According to the width of the feed opening, it is divided into three types: large, medium and small. The width of the feeding opening is larger than 600MM is a large machine, the width of the feeding opening is 300-600MM is a medium-sized machine, and the width of the feeding opening is less than 300MM is a small machine. Different models as options, famous brand bearings, Eccentric shaft and eccentric block are available
Working Principle of jaw crusher:
The jaw crusher is mainly composed of the frame, the eccentric shaft rotating part, the working part of the crushing cavity, the safety device, the discharge opening adjustment device, etc. The crushing method of the jaw crusher is a curved extrusion type. The motor drives the belt and pulley, and the movable jaw swings back and forth through the eccentric shaft. When the movable jaw pushes the movable jaw to move toward the stationary jaw plate, the material is crushed. When the movable jaw and the movable jaw plate retreat under the action of the eccentric shaft and the spring, the previously crushed materials are discharged from the lower discharge opening of the jaw plate. With the continuous rotation of the motor, the crusher jaws periodically crush and discharge materials to achieve mass production.
Advantages
- 1.Deep crushing chamber, low consumption and energy saving; optimized deep crushing chamber, no dead zone, greatly improved feeding and crushing efficiency, single machine energy saving 15%-30%, system energy saving more than double.
- 2.Strong bearing capacity and high stability. Larger forging blanks can process heavy eccentric shafts, high manganese steel jaw plates and high-grade cast steel movable jaw assemblies. The jaw crusher has stronger bearing capacity and higher stability.
- 3.Centralized lubrication system, easy to be maintained, the uniquely designed centralized lubrication system makes the lubrication of components faster and the maintenance workload is small.
- 4.The discharge adjustment range is large, one machine is multi-purpose, the gasket-type discharge adjustment device has a large discharge adjustment range, which increases the flexibility of the equipment and can meet various processing requirements of customers.
Goods Delivery
Based on good quality and decades of experience, the Jaw Crusher which is manufactured by HAMAC was exported to different countries. The Jaw Crusher will be packed and loaded in our factory, and then be shipped to our clients safe and sound.
Technical Parameters
| Model | Input Size(Mm) | Max Feeding Size (Mm) | Output Adjustable Range (Mm) | Capacity(T/H) | Engine Power (KW) | Weight (T) | Dimensions (Mm) |
| PE400×600 | 400×600 | 340 | 40-100 | 16-60 | 30 | 6.7 | 1797×1716×1581 |
| PE500×750 | 500×750 | 425 | 50-100 | 40-110 | 55 | 11.7 | 2119×1918×2046 |
| PE600×900 | 600×900 | 500 | 65-180 | 80-180 | 55-75 | 16.1 | 2309×2028×2368 |
| PE750×1060 | 750×1060 | 630 | 80-180 | 110-320 | 90-110 | 30.1 | 2730×2472×2840 |
| PE900×1200 | 900×1200 | 780 | 95-225 | 220-450 | 110-132 | 49.0 | 3362×2750×3260 |
| PE1000×1200 | 1000×1200 | 850 | 195-280 | 280-550 | 110-132 | 51.2 | 3823×2938×3285 |
| PE1200×1500 | 1200×1500 | 1020 | 150-300 | 400-800 | 160-220 | 100.9 | 4930×3334×4057 |
Note: Our products are being updated constantly, all rights reserved by HAMAC.
Application Case
The Jaw Crusher is widely used for different projects all over the world. HAMAC exported the Jaw Crusher to different countries and got good comments from our clients.
